Development of magnetostrictive displacement sensors in germanjet June 21, 2019 Hits: 76
The high precision and reliability of germanjet magnetostrictive displacement sensor have been verified by thousands of application cases. The sensor uses non-contact technology to monitor the displacement of the moving magnet. Because the magnet and the sensor have no direct contact, the sensor is vulnerable to oil, solution and dust in extremely harsh industrial environment
Why is germanjet displacement sensor more expensive than other brands Release time: June 21, 2019 Hits: 66
The price of germanjet displacement sensor is the market price, which is very reasonable. Users must be aware of the technical differences between germanjet sensors and other magnetostrictive brands, as well as the technical capabilities and technical support provided by germanjet with various dealers. Germanjet is a magnetostrictive displacement
Installation steps and maintenance of etme pull rope displacement sensor Release time: June 21, 2019 Hits: 95
During the installation and operation of the tension rope displacement sensor, the maximum stroke (10 meters pulled out from the original rope clip) shall not be exceeded, and the original rope clip at the rope outlet shall not be released, otherwise the sensor will be damaged.
Displacement sensor voltage output and two wire current output June 21, 2019 Hits: 85
In many applications of PLC control, transmitters are used to convert the signals that PLC can not directly measure into electrical analog signals that PLC can process, such as current transmitter, pressure transmitter, temperature transmitter, flow transmitter, etc.
How to calibrate the rope displacement sensor with length measuring machine Release time: June 21, 2019 Hits: 65
The wire rope displacement sensor is also called pull wire displacement sensor, which is more and more widely used in displacement measurement sensors. The sensor has composite steel wire with high flexibility. The steel wire is wound on the drum. The drum is connected with a precise rotation sensor, and the sensor outputs the displacement signal digitally. Because of its convenient installation
Analysis of simple error source of pulling rope displacement sensor Release time: June 21, 2019 Number of hits: 163
Compared with grating ruler, laser interferometer and other sensors, although its precision is not high, it is widely used because of its convenient installation, low price, large measurement distance and strong anti-interference ability.
Calibration system of pull rod linear displacement sensor Release time: June 21, 2019 Hits: 126
Pull rod type linear displacement sensor is a device that can sense the change of length size and convert it into available output signal through the pull rod. It is the most common type of linear displacement sensor, which can be used to measure the length of displacement, distance, position and strain.
Selection of displacement sensor of oil cylinder and matters needing attention in electrical connection Release time: June 21, 2019 Hits: 79
When selecting the size of magnetostrictive displacement sensor, it is very important to consider the length of the sensing rod and the installation position of the magnetic ring. In order to prevent mutual interference between magnetic ring and geophone, a zone called zero zone is set in process design and manufacturing, and the length is determined according to the type selection of sensor shell
Common faults and improvement of magnetostrictive linear displacement sensor Release time: June 21, 2019 Hits: 89
In the process of practical application, various uncertain factors in the industrial field cause various faults of magnetostrictive linear displacement sensor, which can be summarized as four points: 1) the circuit is blocked or wrong; 2) the magnetic ring is loose, falling off or worn; 3) the electronic head (i.e. the sensor electronic warehouse) is damaged; 4) the strong current interference. By dividing
A brief introduction to the principle and characteristics of magnetostrictive displacement sensor Release time: June 21, 2019 Hits: 84
Since the magnetostrictive displacement sensor was applied in the hot strip mill, it has been well used in the position oil cylinder detection of many equipment in the rolling line. Through the small-scale improvement measures continuously combined with the industrial conditions, it can fully meet the requirements of high precision and high stability of the steel rolling control system. In the application process, we should pay attention to the following points