快三app正规平台⎛⎝Cpsee⎠⎞ Technical support - Shenzhen easy test Electric Co., Ltd

爱博体育app

Website map

contact us

  • Shenzhen easie Electric Co., Ltd
  • Hotline: 137-2888-0902
  • Sales line: 0755-85271862
  • Fax: 0755-27083809
  • Email: info @ cn-opticfiber.com
  • Address: 5 / F, building 8, Honghai building, Hongxing community, Songgang street, Bao'an District, Shenzhen
  • website: http://cn-opticfiber.com

News Center

  • Synchronous mode of magnetostrictive displacement sensor June 18, 2019 Hits: 145

    When the magnetostrictive displacement sensor senses the inquiry period of the controller, the displacement sensor will know when the controller will read the position data, and the sensor will automatically set the time of position measurement to complete the position measurement before the controller reads the position, so as to provide the latest position data to the controller.

  • Matters needing attention in use of built-in oil cylinder displacement sensor of germanjet magnetostrictive displacement sensor Release time: June 18, 2019 Hits: 118

    In the use of germanjet magnetostrictive displacement sensor, attention should be paid to the built-in oil cylinder displacement sensor: the magnetostrictive displacement sensor can accurately detect the absolute position of the active magnetic ring through the internal non-contact measurement and control technology to measure the actual displacement value of the product to be tested; the high precision and high reliability of the sensor have been

  • Demanjet magnetostrictive displacement sensor Release time: June 18, 2019 Hits: 105

    Easytek is an agent of German jet "magnetostrictive displacement sensor" series products abroad. At present, there are three types: Universal slider type, oil cylinder built-in type and liquid level detection type. The signal output modes include voltage type output, current type output, CANbus digital output and SSI parallel output PROFIBUS mode.

  • Precautions for manufacturing etme pull rope displacement sensor Release time: June 17, 2019 Hits: 76

    Attention must be paid to the concentricity of the shaft adhesion of the tension rope displacement sensor of the encoder. Consult the chief technical engineer for all mechanical knowledge. The assembly personnel are required to strictly implement the above-mentioned rope displacement sensors to strive for the best and fastest production.

  • Various output principle and wiring diagram of rope displacement sensor June 17, 2019 Hits: 156

    The rope displacement sensor / encoder is the ingenious integration of linear displacement sensor in the structure, which fully combines the advantages of angle displacement sensor, linear displacement sensor, gear and rack transmission, and eliminates its disadvantages. It has become a compact structure, multi-purpose, simple installation, small installation space and no compensation

  • Connection method of magnetostrictive displacement sensor replaced by resistance ruler Release time: June 17, 2019 Hits: 94

    Do not connect + 24VDC to 0V of magnetostrictive displacement sensor and 0V to signal output point at the same time, otherwise the sensor will be burned immediately. (Note: if the above situation occurs, it is not covered by the warranty terms)

  • Quality inspection standard of displacement sensor Release time: June 17, 2019 Hits: 71

    Smoothness: the general variable resistance requirement is less than 47mv, but the standard of displacement sensor is less than 10mV. Linear accuracy: it can be divided into the linear accuracy before and after engraving. Generally speaking, the linear accuracy of resistor body before trimming is about + - 2%, and the average linear accuracy of resistor body after trimming can be controlled within + - 0.5%

  • Structural diagram of resistance linear displacement sensor Release time: June 17, 2019 Hits: 187

    Schematic diagram of composition structure of resistance type linear displacement sensor: the main structure of resistance type linear displacement sensor (resistance ruler) is composed of electric brush and resistance body (resistor piece), as shown in Figure 1 below. The shape of resistance body can be made according to the requirements of customers

  • Accuracy calculation method of linear displacement sensor Release time: June 16, 2019 Hits: 114

    There are two ways of linear accuracy error of displacement sensor: average linear error accuracy and maximum linear error accuracy. Average linear accuracy error: the calculation formula is {maximum positive tolerance | + | maximum negative tolerance} / 2 = ± average linear accuracy%

  • Error difference of displacement sensor Release time: June 16, 2019 Hits: 139

    Displacement sensor various error difference, basic error, absolute error, additional error, relative error, measurement error, reference error


Online Service
share share
Copyright: Shenzhen easie Electric Co., Ltd. record No Yue ICP Bei No. 19052563 Network security No. 44030602003587 Technical support: Xinghai Internet