Stout, easy to install, highly protected against environmental agents: EPS linear wire transducers
series for those industrial applications which require high accuracy and measuring length up to
12 metres; typical applications are: X-Y tables, hydraulic and pnematic cylinders, packing machines,
The transducer consists of an encoder or a potentiometer operated by means of a wire-reel mechanism;
the wire is out of stainless steel covered with nylon.
The potentiometer EPS
provides an analogue signal proportional to the linear displacement of
the wire, while the encoder MPS-P provides a number of pulses proportional to the linear displacement
of the wire. The inside spring controls the return of the wire to the starting position.
For both types the travel speed is 1000/2000 mm/sec., depending on the stroke,
and the protection degree granted by the stout anodysed aluminium case is IP64. The connection is
by means of a cable 1 m long. The operators will surely appreciate the mounting method,
Linear wire potentiometer /encoder is a ingenious combination of rotary sensors and linear sensors ,
with longer sensing scope ,same measurement precise ,smaller structure ,which are widely adopted
by customers from different fields .this series of sensors have sensing scope from 200mm to 20000mm,
with output of analog current signal 4~20mA , anolog voltage signal 0~5V or o~10V and digital pulse A、B、Z phase signal outputl
OEM orders are warmly welcome。
Details: http://W WW.cn-opticfiber.com
1.To install stainless steel wire ,the angle of wire should be got proper and minimal,the allow tolerance is at+/-30.
2.To make sure that the hook of the stainless steel wire does not exceed the measurement range ,otherwise ,the wire will be to break off or you will get inferior accuracy.
3.The wire is stainless steel with fluorin coating.You will get inferior accuracy if the wire is damaged or stretched excessively.
4.You can move the linear sensor instead of the wire.
5.If your application is not linear motion,please set the pulley to smooth the rotation.
6.If the products work under serious environments,such as oil,water ,heavy dust,iron chipping or shavings or any powder can cause to hurt the wire,please make more protective cover or other equipment. Linear displacement sensor
7.The acceleration for EPS-S-P series is under 1m/sec. max;the acceleration for l
EPS-L-P and EPS series is under 0.5m/sec.max.
8.Details: http:// cn-opticfiber.com